Cleaning an inflatable hot tub: It works with these six tips

Some inflatable hot tubs have a

.

This way you can keep leaves, grass and other dirt away from the hot tub.

Before using it, it is advisable to take a shower or at least take a foot bath.

when cleaning the inflatable hot tub.

Otherwise you could damage or scratch the pool.

Therefore, it is better to use a cloth or a sponge.

After cleaning, rinse the whirlpool thoroughly again so that no cleaning agent residues remain.

We recommend detergents, soap or washing-up liquid for cleaning.

Of course, various manufacturers also offer

.

However, do not use too many chemicals, as they can damage the hot tub and cause skin irritation.

, we simply recommend a bucket of warm water, liquid detergent and a sponge.

Under no circumstances should you use anti-limescale solutions or similar decalcifying agents.

These can have a very aggressive effect on the wall of the hot tub.

As a rule, there are no limescale deposits in an inflatable whirlpool anyway.

Lime is particularly favored by hard water.

Hard water promotes lime, but soft water is not a solution either.

Because soft water is aggressive and can accumulate.

As a rule, you can also regularly measure the pH of the water.

This should have a value between 7.2 and 7.8.

In addition to the inflatable hot tub,

must

, especially the spa pump and filter cartridge.

Disconnect the pump from the power supply and remove the cartridge.

You should now rinse both parts with clear water.

Various manufacturers recommend changing the filter every one to two weeks.

You can clean the surface of the spa pump with a sponge or cloth.