How to change decoration and hang curtains in the blink of an eye, without drilling your wall?
There are many great solutions for renters or homeowners who don't want to damage their walls.
What are the options for hanging a curtain rod without drilling your stud, your wall or your wood or PVC window?
Here are some tips.
How to put a curtain rod between two uprights?
Apart from the adhesive brackets that allow you to hang a light curtain on a window, there are several fixing systems depending on the situation for placing a rod between two uprights.
All without drilling, without making noise and without dust.
This is the case of fixings which are installed on existing holes: no need to drill again.
Read alsoSiding, brick, wood: how to choose your wall covering?
Another option is self-tightening devices without drilling, designed for any type of window: casement window, bow window (bay window), recessed window, roof window, French window or even sliding window.
You will find different models, such as bracket fixing, the support resting on the roller shutter box or on the upper part of the window frame, or the cylinders which hang on the hinges or the hinges in the upper part of the window. the window.
Last option: the rod that attaches directly to the glass of your windows via a pressure or adhesive system).
Once the rod is in place, all you have to do is hang your curtain with eyelets, rings, stripes, tab finish, your net curtain or your thick blackout curtain.
How to install a curtain rod between two walls?
In DIY, the simplest solution to install a curtain between two sections is the extensible pressure rod, available in three sizes:
60 to 90cm,
90 to 150cm,
and 150 to 200cm.
On the same principle as the rods used to hang a shower curtain, it is installed by simple pressure, thanks to ends equipped with protective pads on the wall.
Before fixing it, remember to install the curtain with eyelets or tabs on the rod.
Read alsoCordless hammer drills: essential for the do-it-yourselfer
This type of curtain rod makes it possible to close a dressing room, create a separation in a room, or even hide the inside of a closet, quickly and without drilling.
Positive
It disappears aesthetically behind the curtains.
How to install a curtain rod on a PVC window?
Installing a curtain bar on a PVC window without drilling is possible and above all, recommended.
Indeed, it is better not to drill the trunk of a PVC window to install curtains there.
If it is considered that the window is pierced, it is likely to lose its thermal insulation properties.
You could then lose the warranty.
On a PVC window, you can use the patented IB+ system, easy to install, to dress a window or a French window, whether double hinged or tilt-and-turn.
with or without roller shutter box.
Read alsoSeven golden rules so that your bathroom is not a nest of germs
The system is based on protective pads that must be glued or fixed straddling each window sash, in the upper left corner.
Then the whole thing is held together with screws that keep the bracket in place.
To note
The insulation of the window is completely preserved.
As you can see, there are many solutions to decorate your windows without drilling and without the risk of damaging the support.
Choose the one that best suits your situation and your type of windows.
