Often soft and warm, the rug also brings a cozy decorative touch to a living room or bedroom.
In addition, it can have a protective function for the floor covering and thus prevent its premature wear.
Carpets are also real traps for dust and dust mites.
Also, given the frequent back and forth, they are prone to staining easily.
For all these reasons, regular maintenance is necessary, and it is essential to know some tips for cleaning a carpet without damaging it.
Clean a carpet: the importance of regular maintenance
Cleaning a carpet requires above all good daily maintenance.
This is to effectively eliminate the mites that nest in its fibers and later avoid having to perform a deep cleaning.
Regular vacuuming, once a week, is strongly recommended.
If the carpet is fragile or old, it is advisable not to use the brush of the device so as not to damage it.
For a large wash, baking soda and a little sparkling water will definitely be the winning combination.
Ideal for removing stains and regaining an original shine, here is the method to follow:
impregnate the carpet with a sponge soaked in sparkling water, then rub it gently over the entire carpet or directly on the stains;
sprinkle the carpet with baking soda after it has had time to dry;
leave the baking soda powder on for at least 1 hour;
then vacuum.
Non-aggressive, this technique also makes it possible to revive the colors of a somewhat tarnished carpet.
Read alsoHung on the wall or placed on the floor: the rug becomes the centerpiece of our interiors
Cleaning a carpet with white vinegar and washing up liquid
For an ecological and effective cleaning, place with the star of the household in the matter: the white vinegar or the alcohol vinegar.
Its uses are also multiple: whether it is to deodorize, clean up a space or detach a surface, white vinegar is the product that is suitable in all circumstances.
Combined with dishwashing liquid, it will be a perfect cleaner for a stained carpet.
To do this, you must:
generously pour white vinegar on a cloth and rub the unwanted stains;
leave to act for about twenty minutes (to be adjusted according to the tenacity of the stain);
prepare in parallel a solution of warm water (the equivalent of a bowl) and washing-up liquid (a tablespoon);
rub this preparation on the carpet using a brush, then rinse well with clear water;
then rinse the mat with a clean, dry cloth.
In video, eight gestures to adopt to take good care of your bed linen
Clean a carpet with soapy water: simple, practical and effective
If the carpet is not too dirty, one of the easiest and fastest ways is to use the timeless soapy water.
To do this, use a sponge moistened with lukewarm water, then rub it with a dry homemade or store-bought soap (Marseille soap will be very suitable here).
Work the soap into a lather and gently wipe the sponge over the soiled areas of the carpet.
The rinsing is to be carried out with clear water, rubbing with a cloth.
Moreover, to thoroughly clean a carpet or rid it of particularly encrusted and difficult to remove dirt, black soap can certainly save the day.
It will be necessary here to dissolve the equivalent of a tablespoon of black soap in 1 liter of warm water, then apply the solution to the stains with a sponge.
To permanently remove stains, use a stiff brush.
After letting the carpet dry, it will be necessary to vacuum it (with or without a brush depending on the fragility of the carpet) to remove the residue.
As we can see, the maintenance and cleaning of a carpet cannot be improvised.
Fortunately, there are suitable and often natural methods to wash it effectively.
These keep the carpet sanitized, healthy and stain free.
Its lifespan and shine are thus optimized.
