The Limited Times

Now you can see non-English news...

Dishwasher: the 7 most common breakdowns

2023-02-20T06:01:09.849Z


Drainage problem, white marks on glasses or badly washed dishes, faulty door seal… What are the most common problems encountered with a dishwasher? How to repair the breakdowns of your household appliance if troubleshooting is within your reach?


Properly maintaining your dishwasher is not enough to protect us from problems.

But you can repair some faults in your home appliance without calling a professional.

The dishes are not clean or with white marks

If your plates are not clean after washing and rinsing, it could be due to several factors.

The most common is a problem with the spray and wash arms, the rotating parts of the dishwasher that distribute water through the tub to clean dishes.

If they are clogged or clogged, the water will not be distributed evenly.

Clean them regularly and at the same time wash the filter, which can quickly become clogged.

White streaks on dishes may indicate hard water or limescale buildup in the dishwasher.

Consider using a detergent made specifically for hard water or adding a water softener or rinse aid.

If the problem does not come from the points already mentioned, you can also check if you are using the right amount of detergent (see the instructions) and the water temperature settings.

Don't overload your appliance with plates and cutlery.

Finally, remember to clean the inside of your dishwasher with white vinegar to degrease it.

Water does not fill the dishwasher

If water does not fill your dishwasher during the wash cycle, the dishwasher fault can come from three different entry points:

-

The water inlet tap

: this is the valve located under the sink that controls the water inlet to the dishwasher.

If the water inlet tap is closed, the dishwasher will not be able to receive water.

-

The water inlet hose:

check that it is not clogged or bent and that the water can easily circulate.

- Or

the float

 : it is a part located inside the dishwasher that regulates the water level during the cycle.

If it is stuck, the dishwasher will not fill.

You can solve this problem by removing the float and cleaning it once disassembled.

Dishwasher water not draining

The water does not drain properly from the dishwasher at the end of the cycle and risks overflowing?

It could be a blockage in the drain hoses, filter or drain pump.

Disassemble to check.

The drain hose

is the part that carries dirty water out of the dishwasher.

If there is a clog or it is overloaded with residue, the water will not be able to be evacuated.

The dishwasher filter

may also be clogged.

It is important to clean it regularly to avoid blockages.

Finally,

the

circulation pump helps pump dirty water out of the dishwasher.

If it is clogged, defective or if the drain hose is too worn, the water will not be drained properly.

If you find that the pump is damaged, be sure to replace it.

Either way, avoid filling your household appliances with dishes that have a lot of dirt or food residue.

My dishwasher no longer dissolves tablets

If the dishwasher does not dissolve the detergent tablets, it may be due to:

  • a blocked or damaged spray arm propeller,

  • an excessive amount of dishes in the dishwasher,

  • a washing temperature that is too low to dissolve the tablet,

  • insufficient water pressure,

  • or a problem with the detergent box located in the door of the dishwasher:

Does the flap open easily?

Its mechanism may be seized up, preventing the washing tablet from dissolving.

If you can't find a spare part to replace it, just put the tablet in the cutlery basket.

My dishwasher is no longer drying

If there is water left in the bottom of the tub at the end of a cycle, it may prevent effective drying.

Clean the filter and check that the drain hose is not kinked, preventing water and moisture from draining out.

Poor drying performance can also be caused by a faulty dryer element, a damaged fan or an excessive amount of humidity in the dishwasher.

Dishwasher water not heating

If the water is not hot enough, make sure your dishwasher is set to an appropriate water temperature.

Also check that the salt box is full of water and that the end of the drain hose is properly inserted into the drain outlet.

The lack of heating could be caused by a bigger problem like a faulty heater resistor, a faulty thermostat or an electrical connection issue.

Call a specialized repairer to replace the defective parts if necessary.

My dishwasher is leaking

Is there a water leak from your dishwasher?

If it is too high, be careful and unplug your appliance.

Then look for the source of the problem to limit your water consumption.

It may be due to:

  • Faulty door seals,

  • Your filter that is clogged.

  • A damaged drain pipe,

  • A clogged wash arm,

  • Or a water pipe connection problem.

Replace or repair defective parts to prevent potentially damaging water leaks.

These problems can have multiple causes.

Our advice: have your dishwasher diagnosed and repaired by a professional repairman if you are not sure of the cause of the problem or if it touches a sensitive part (turbine, electronic card, pressure switch, capacitor, immersion heater, etc.)

Source: lefigaro

All news articles on 2023-02-20

You may like

Life/Entertain 2024-02-16T18:11:52.678Z
News/Politics 2024-03-08T15:27:37.967Z
Life/Entertain 2024-02-20T08:13:03.626Z

Trends 24h

News/Politics 2024-03-27T16:45:54.081Z

Latest

© Communities 2019 - Privacy

The information on this site is from external sources that are not under our control.
The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them.