To combat the heat and high temperatures that occur during the summer, the
fan
is one of the most faithful allies, especially if you do not have air conditioning.
However, since it does not have the characteristic of ingesting hot air and releasing it cold, the place where the fan is located is extremely important.
In detail,
what is the best location to cool the room.
The air released by the fan is nothing more than the same air that is in the room moving constantly.
As heat rises and cold air falls, the ceiling fan is positioned as the best alternative to cool the environment, since it pushes down the
dense air that rises
and , during this movement, a current is generated by convection.
For those who do not have this type of fan and have a standing or desktop fan, the most important thing will be
to guarantee air flow
by placing it away from corners or together with cabinets or furniture, since the more open the environment is, the better.
.
Fan: what is the best location to leave it in summer
Another aspect to take into account will be the entry of heat, that is, the areas of the room that are more exposed to the sun and, consequently, gather more heat.
To avoid this, ventilate them
The blowers should be located pointing towards those areas, with the aim of
pushing the cold air there and expelling it from the area.
The closer to the ground, the better.
Standing or table fans are usually placed on furniture or objects so that they are at the height of the bed or person.
However, if it is placed as close to the ground as possible,
it will be able to collect colder air
and move it throughout the environment.
Another alternative is to add a glass full of ice in front, with the aim of melting them and allowing even colder air to spread.
Tricks for the fan to pull colder air
Another, more complex but effective, is to place bottles with ice and salt in the fan.
To do this, you will need to have
two bottles
of approximately 500 ml (always depending on the size of the fan), from which the packaging must be removed, and then cut the base, without removing it completely from the bottle.
Then, you will have to make small holes, approximately the size of a marble, along both bottles.
The next step will be to tie the bottles upside down and to the side of the fan with a wire (generally the area where its power is chosen), making sure that it is firm and does not wobble due to the movements of the fan.
In this way, the bottles will serve as a kind of refrigerant that will reduce the temperature of the environment and spread cold air.
Tricks for the fan to pull colder air
Finally, small ice and a little coarse salt should be placed inside the bottle, introduced from the cut base and not from the lid, which should remain closed so that the water does not fall out once the ice begins to melt.
The effect of salt allows the frozen water to not reach the freezing point.
This will make
the air from the fan cooler into the room.